The machine stops several times...

Results 1 to 3 of 3

Thread: The machine stops several times...

  1. #1
    Member e_perez's Avatar
    Join Date
    Sep 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default The machine stops several times...

    Hey everyone.

    I´m working with CNC USB controller software and my CNC machine stops many time times while running differents G-code. It can perfectly work for some weeks or make stops several times in a few minutes.

    The machine normally works, but then the X,Y,Z values no more change in the CNC USB software. After that the machine move really slowly, I think it go back to the previous line of the G-code and stop.

    I have to reset the controller (machine/firmware/reset controller) and the machine work normally until the next stop.

    I,ve checked the USB connector and changed the USB cable, I´ve checked the ground conection of the power supplie but I had the same trouble. I´m working with a notebook....

    Do you have any heps about this trouble?

    thanks to everyone in advance
    exe

    Similar Threads:


  2. #2
    Member ScorpionTDL's Avatar
    Join Date
    Aug 2020
    Posts
    70
    Downloads
    0
    Uploads
    0

    Default Re: The machine stops several times...

    are you running some additional software on the system while you run planet cnc?
    In the past I had significant issues running planetcnc tngv2 and fusion 360 in parallel. From time to time tngv2 froze and stopped working.



  3. #3
    Member e_perez's Avatar
    Join Date
    Sep 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: The machine stops several times...

    Hey scorption,

    No, it desn´t run any other software. I use this notebook only to control de CNC machine. I tried to turn off the wi-fi connection adn the antivirus (AVG antivirus)... but I had the same troubles.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

The machine stops several times...

The machine stops several times...

The machine stops several times...