Tool Table

Results 1 to 7 of 7

Thread: Tool Table

  1. #1
    Member
    Join Date
    May 2008
    Location
    uk
    Posts
    266
    Downloads
    4
    Uploads
    0

    Default Tool Table

    This problem happens when in Edit Tool Table.

    2021.08.12 Software

    I set the axis coordinates in Toolchange Position under the Tool Change tab,and click Update followed by OK.
    When I return to check what I have entered, I find the Toolchange Position coordinates have reverted to zero, but the values have been relocated as a Tool Offset under the Offset tab.

    If this is correct behaviour, then can someone please explain how it works.

    Thanks. Martin.

    Similar Threads:


  2. #2
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    1295
    Downloads
    0
    Uploads
    0

    Default Re: Tool Table

    Yes, it seems that this is a bug. We will fix this ASAP



  3. #3
    Member
    Join Date
    May 2008
    Location
    uk
    Posts
    266
    Downloads
    4
    Uploads
    0

    Default Re: Tool Table

    Quote Originally Posted by PlanetCNC View Post
    Yes, it seems that this is a bug. We will fix this ASAP

    Thanks for that.

    Something else I have noticed is that if you make changes under the Speed & Feed tab, then eventually, the edit fields 'grey out' and become uneditable. Only a restart of TNG seems to bring it back to life for a while.

    Martin.



  4. #4
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    1295
    Downloads
    0
    Uploads
    0

    Default Re: Tool Table

    Can you post a screenshot?=



  5. #5
    Member
    Join Date
    May 2008
    Location
    uk
    Posts
    266
    Downloads
    4
    Uploads
    0

    Default Re: Tool Table

    Here you go.

    Under the Parameters tab, I changed the tool material from Carbide to HSS and it became 'greyed out' after that.

    Martin.

    Tool Table-speedfeed-jpg



  6. #6
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    1295
    Downloads
    0
    Uploads
    0

    Default Re: Tool Table

    Quote Originally Posted by blowlamp View Post
    I changed the tool material from Carbide to HSS and it became 'greyed out' after that.
    Do you have valid license and connected controller?
    This feature requires valid license.



  7. #7
    Member
    Join Date
    May 2008
    Location
    uk
    Posts
    266
    Downloads
    4
    Uploads
    0

    Default Re: Tool Table

    That sounds like the answer.

    I have a controller with a valid license, but I'm running in simulation mode on a different computer at home.
    I'll try again on the CNC connected computer.


    Martin.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Tool Table

Tool Table