Yes, it seems that this is a bug. We will fix this ASAP
This problem happens when in Edit Tool Table.
2021.08.12 Software
I set the axis coordinates in Toolchange Position under the Tool Change tab,and click Update followed by OK.
When I return to check what I have entered, I find the Toolchange Position coordinates have reverted to zero, but the values have been relocated as a Tool Offset under the Offset tab.
If this is correct behaviour, then can someone please explain how it works.
Thanks. Martin.
Similar Threads:
- Need Help!- Script for setting tool heights in tool table a probe
- Strange string of numbers in mach3 tool table reference tool offsets row?
- Change tool locations in tool table after breaking tool pocket
- Need Help!- Tool length offset table in combination with undefined tool
- Tool table, tool length management, 'master' tool
Yes, it seems that this is a bug. We will fix this ASAP
Can you post a screenshot?=
That sounds like the answer.
I have a controller with a valid license, but I'm running in simulation mode on a different computer at home.
I'll try again on the CNC connected computer.
Martin.