- M62 to assign output number 4 to fire the torch
-
M62 to assign output number 4 to fire the torch
hi Newbie here. having completed my table i am now in the process of commissioning. as i am new to g and m code
i am on a fairly steep learning curve. I am using a planetcnc USB MK3/4 With planetCNC TNG.I have wired the trigger switch for the plasma to output number 4 but i am having trouble getting my head around using m code to assign output number 4 to be trigged either in the program or in the Post processor (THC floating z axis) ie the code syntax and where to position it in the PP/ Program
any help would be gratefully accepted. thanks
-
-
Member
Re: M62 to assign output number 4 to fire the torch
Hello Newbie,
did you ever type M62 P4 Q1 in the MDI?
This switches output 4 to "on".
M62 P4 Q0 to "off".
- M62 to assign output number 4 to fire the torch
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules