So you start the program and then connect the machine? Most people do it the other way around.
Hi, I have a problem with my cnc software, hope someone can help me .
When I start the program evrything is ok, but when i connect the machine the X axis turn purple and the machine moves only in the z axis, also when i try to run a file the machine doesn't move even if there are no mistakes or warnings.
Similar Threads:
- error 368 X AXIS : SERIAL DATA ERROR (INT)
- Gross positioning error Y 1C (got error on both X/Y axis) after replaced spindle driv
- Need Help!- X axis fault Error #1 but gives error #3 when amp card swapped
- Need Help!- Error 414 Z axis error detect- servo alarm
- Need Help!- Error 414 Z-axis error detect servo alarm
So you start the program and then connect the machine? Most people do it the other way around.
[FONT=Verdana]Andrew Werby[/FONT]
[URL="http://www.computersculpture.com/"]Website[/URL]