Mk3/4 enclosure 344 front port

Results 1 to 2 of 2

Thread: Mk3/4 enclosure 344 front port

  1. #1
    Member flygeek's Avatar
    Join Date
    Apr 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Mk3/4 enclosure 344 front port

    I assembled a Mk3/4 344 enclosure and wired everything up per instructions, but I can't figure out the purpose of the round connector on the front of the enclosure. Does anyone know what that port is used for?

    Similar Threads:


  2. #2
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    1295
    Downloads
    0
    Uploads
    0

    Default Re: Mk3/4 enclosure 344 front port

    this port is for probe/sensor



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mk3/4 enclosure 344 front port

Mk3/4 enclosure 344 front port