Lost license on 6040 and PlanetCNC control

Results 1 to 4 of 4

Thread: Lost license on 6040 and PlanetCNC control

  1. #1
    Member XRing3's Avatar
    Join Date
    Nov 2020
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Lost license on 6040 and PlanetCNC control

    My CNC was working well, until today. I messed up on a few lines of Gcode and failed to set the Z axis to zero and when I clicked play, the spindle plunged down jamming into the jig I had holding my work. Before I could hit the E stop, the fuse popped. I replaced the fuse and I couldn't reconnect the laptop to the controller. I swapped USB cables and still no dice. I tried restarting everything, that didn't work either. I dug a little deeper and it looks like my license isn't valid. I tried to reactivate the software with the controller and it's giving me an error. What am I missing? I'm sure it's something simple and I'll kick myself. But I need this machine running ASAP

    Thanks.

    Similar Threads:


  2. #2
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    856
    Downloads
    0
    Uploads
    0

    Default Re: Lost license on 6040 and PlanetCNC control

    Controller should work (with limitations) even without license.



  3. #3
    Member XRing3's Avatar
    Join Date
    Nov 2020
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: Lost license on 6040 and PlanetCNC control

    Quote Originally Posted by PlanetCNC View Post
    Controller should work (with limitations) even without license.
    It doesn't connect at all. I tried a different cable with the same results, even tried a different laptop. Is it possible the controller is shot? If so, I'll order a new one right away. I don't think I've had this for a year. I'll have to verify which one I need. When I get a chance I'll take a picture and post it.

    Dan T.
    Xring3.com


  4. #4
    Member XRing3's Avatar
    Join Date
    Nov 2020
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: Lost license on 6040 and PlanetCNC control

    This is what I have right now. This is what I assume I need, https://planet-cnc.com/product/mk3-drv/

    Attached Thumbnails Attached Thumbnails Lost license on 6040 and PlanetCNC control-20210506_121001-jpg  
    Dan T.
    Xring3.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Lost license on 6040 and PlanetCNC control

Lost license on 6040 and PlanetCNC control

Lost license on 6040 and PlanetCNC control