Invert PWM on genuine Planet CNC MK3/3 Board

Results 1 to 2 of 2

Thread: Invert PWM on genuine Planet CNC MK3/3 Board

  1. #1
    Member
    Join Date
    Apr 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Invert PWM on genuine Planet CNC MK3/3 Board

    Hello.

    I have a Planet CNC MK3/4 Controller board in combination with an JP-3163B Board.

    My Problem is, that I am getting 10V output at S0 (0RPM) Spindle speed and 0V output at S120000 (100%) Sindle Speed.

    I tried to check the box to invert output 2 (which is my PWM signal) but that makes no difference.

    Is there any way to work this in software or do I have to make a hardware fix?
    *I am using the old design Planet CNC Software.

    Similar Threads:


  2. #2
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    856
    Downloads
    0
    Uploads
    0

    Default Re: Invert PWM on genuine Planet CNC MK3/3 Board

    Why don't you use new software?



  3. #3
    Member
    Join Date
    Apr 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Invert PWM on genuine Planet CNC MK3/3 Board

    Please excuse my late reply, my account had been blocked because I didn't want to enter my private phone number.
    I will try to give an sufficient detailed answer in this post since I will be able to read but may not be able to answer again.

    I am using the old software, because that is what was avaiable when I started using your products.
    The MK3/4 board is my second of your boards after my old one died.

    I did not try the new software because I was not able to find any information about a function for inverting here. Every pictures videos and documentary I found didn't show any additional options compared to the old version.

    If I switch to the new version, I will have to update the firmware on my board .. is it possible to reverse this update and later use the old software version again?


    Does the new version contain a function to invert the signal or was your post just an unrelated question?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Invert PWM on genuine Planet CNC MK3/3 Board

Invert PWM on genuine Planet CNC MK3/3 Board

Invert PWM on genuine Planet CNC MK3/3 Board