Do you have any offsets programmed in your G-code or post-processor?
I'm using Planet CNC SW
I issue a G00 X0 Y0 command
Goes to X-1, Y-1
See my Pics
Cappollo
Similar Threads:
Do you have any offsets programmed in your G-code or post-processor?
[FONT=Verdana]Andrew Werby[/FONT]
[URL="http://www.computersculpture.com/"]Website[/URL]
G92.1 did not help.
I inherited this machine and software and I must admit I am a newbie at this.
Any G00 command I issue looses 1mm on each axis. I guess I can just move my Origin X-1 and Y-1, but that just seems wrong.
Funny enough, if I click on the "XY" button, it goes back to 0,0 - go figure.