Offset at the edge finder

Results 1 to 2 of 2

Thread: Offset at the edge finder

  1. #1
    Member tantemay's Avatar
    Join Date
    Nov 2015
    Location
    Warendorf
    Posts
    257
    Downloads
    0
    Uploads
    0

    Default Offset at the edge finder

    I have an edge finder that is mounted on the side of the Z-axis. So its position is offset from the clamped tool.

    Is it possible to enter this offset via settings?

    Similar Threads:


  2. #2
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    1295
    Downloads
    0
    Uploads
    0

    Default Re: Offset at the edge finder

    This is not in settings. You'll have to modify scripts.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Offset at the edge finder

Offset at the edge finder