4 axis display problem

[adidoro]

I`m new to TNG so be kind with me.
I have a problem with displayed toolpath in 4 axis.
When work coordinate is the same as machine display is ok.

When work coordinate is offset from machine coordinate it distort the toolpath like this:

In the old softare with offset didn`t had this problem:

The toolpath work without problems only it is displayed incorrect.
If disable rotary axis in display 3d toolpath display is correct and not distorted, but not 3D.
I hope I explained well the problem, if not I`m here for any clarifications.

Similar Threads:

• 5 Axis 3D toolpath display problem
• 5-axis CNC Breakout board and problem with connection display module
• problem with display of Z axis (TNC 121)
• 15i-M display problem
• Need Help!- m-2 display problem

[adidoro]

I really need an answer and solution because in 4 axis toolpaths, things get worse.
Here is an example of 4 axis toolpath displayed on only 3 axis on TNG.

[adidoro]

Workaround for this is for now to copy a profile with machine in simulation and load toolpath in machine position, aka work position to machine position to see toolpath displayed correctly, then I can load toolpath in real profile for machining.
Here it is displayed correctly.

I hope this is a temporary solution, and it will be fixed soon.

[PlanetCNC]

Send me these g-codes. I assume profile is the same.

[adidoro]

Problem solved thanks to PlanetCNC support.