- 4 axis display problem
-
Member
-
-
Member
Re: 4 axis display problem
I really need an answer and solution because in 4 axis toolpaths, things get worse.
Here is an example of 4 axis toolpath displayed on only 3 axis on TNG.
-
Member
Re: 4 axis display problem
Workaround for this is for now to copy a profile with machine in simulation and load toolpath in machine position, aka work position to machine position to see toolpath displayed correctly, then I can load toolpath in real profile for machining.
Here it is displayed correctly.
I hope this is a temporary solution, and it will be fixed soon.
-
Member
Re: 4 axis display problem
Send me these g-codes. I assume profile is the same.
-
Member
Re: 4 axis display problem
Problem solved thanks to PlanetCNC support.
- 4 axis display problem
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules