Dialog bevor M3

[tantemay]

Hello.
I would like a dialog box to appear when the spindle is started.
For this I wrote the following in M3 Script.

(dlgname,Start From Selected Line, opt=1)
  (dlg,Click OK to continue, typ=label, x=20, w=250, color=0xffa500)
  (dlgshow)

If I start a program, or enter M3 in the MDI, or an M3 command comes in the q-code, it works.
But when I press the spindle start button, it doesn't work, it seems to me that this button switches the output pin directly.

Similar Threads:

• Deckel FP4 Dialog 4
• Dialog 112
• DECKEL DIALOG 11
• Problem- DMC 100 with dialog 112
• dialog box

[tantemay]

Ok i found it. You can change it in the settings.
Somehow I have the feeling that TNGv2 has a solution for everything, I'm just too stupid to find it.

[PlanetCNC]

You are not stupid. It is our fault that some features are never found and/or used.

[gachrainer]

Ok i found it. You can change it in the settings.
Somehow I have the feeling that TNGv2 has a solution for everything, I'm just too stupid to find it.

Hi,

I'm just curious: what was the required option?

Thanks in advance,

Gerhard

[tantemay]

Hi,

I'm just curious: what was the required option?

Thanks in advance,

Gerhard

Have a look.

[gachrainer]

Have a look.

Thanks!