Originally Posted by
gachrainer
Hi Deklos,
there is no lookup, the duty number is just the percentage of power output from your laser. For these kind of diode lasers (as opposed to CO/2 lasers, which are a way more powerful), you will bei in the range of 1000-3000 mm/min feed speed while having the laser in the range of 30-100% output, but it all depends on the material you are using.
The post-processor for the Vecrtic Laser Add-on was just a breeze to create, I can provide it any time if needed.
Today, we finished the laser add-on for our CNC, including some videos that we took. It will be available later, I'll update you here.
Best regards from Austria,
Gerhard