- Mk3 OUTPUT connector fpr Arduino?
-
Member
Mk3 OUTPUT connector fpr Arduino?
Hello.
Is it possible to convert the PWM signal from pin 1, 2 or 6 per capacitor into a 5 V signal?
Can the + 5v pin from the outout connector be used to power an Arduino?
Similar Threads:
-
-
Member
Re: Mk3 OUTPUT connector fpr Arduino?
For pin 6 can be done, whileI have add minor electronic for controling rpm of spindle and goes from 0 to 10V.
For power supply I am not shure because some ardu's can draw more current...
-
Member
Re: Mk3 OUTPUT connector fpr Arduino?
what minor additional electronics did you add for rpm control? My output board is not generating 0-10 volts. 0-0.3 is what I am getting. Pin 6 on pwm with a lagging volt meter does generate 0-4.9+ volts.
-
Member
Re: Mk3 OUTPUT connector fpr Arduino?
A friend of mine made for me and is something like this but without releys. Input is 12V from PS for MB
- Mk3 OUTPUT connector fpr Arduino?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules