- unable to manually select Tool with number > 99
-
Member
unable to manually select Tool with number > 99
I'm currently about to switch my CNC over to TNG.
While testing out the software I noticed that I'm not able to manually switch to tools with a tool number lager than 99.
According to the manual tool number between 1 and 255 are possible. However in the Menu "Machine/Tools/Change" only tools up to 99 are listed.
Changing with gcode & M6 is working correctly and the correct text is shown in the Popup Text Box.
Is this by design or is this a bug in the GUI?
I'm currently running SW 2020.07.31
best Regards
Klaus
Similar Threads:
-
-
Member
Re: unable to manually select Tool with number > 99
999 tools are possible. Manual needs to be updated.
However in tool change and tool select menu only numbers 1-99 are displayed. This is by design.
-
Member
Re: unable to manually select Tool with number > 99
Thanks for the info.
Nice to know that the limit was raised.
- unable to manually select Tool with number > 99
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules