Feed rate problem when jogging with jogging keyboard.

Results 1 to 3 of 3

Thread: Feed rate problem when jogging with jogging keyboard.

  1. #1
    Member
    Join Date
    Jan 2007
    Location
    gr
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default Feed rate problem when jogging with jogging keyboard.

    I am facing a problem with an older Mk3/4 which I use many years now.

    Recently, I bought the jogging pcb and trying out I found that it does not have constant feed rate.
    Every time I move an axis, it uses different feed. In the video , in the beginning it goes I think 2.500mm/min, then drops to 500mm/min something like that.


    If I enable the speed adjust option, the pot does nothing (maybe due to the old Mk3/4?) and the machine moved with variable feed.

    I use the classic software with this machine due to the old Mk3/4.

    Any ideas?



    Similar Threads:


  2. #2
    Member
    Join Date
    Jan 2007
    Location
    gr
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default Re: Feed rate problem when jogging with jogging keyboard.

    And this video is with speed adjust on and just pressing the move axis button





  3. #3
    Member
    Join Date
    Jan 2007
    Location
    gr
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default Re: Feed rate problem when jogging with jogging keyboard.

    UP



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Feed rate problem when jogging with jogging keyboard.

Feed rate problem when jogging with jogging keyboard.