G28/G30 and move to zero do not work.

[tantemay]

Today I noticed that when I click on G28 / G30 or Go to Zero in the TNG v2 software, nothing happens.

Similar Threads:

• Considering to move from Onecnc to Fusion because 5 axis won't work now please help.
• Move work offset (G54) with G10 (18i-T)
• How to move work rest, IG 400-IV, matrix.
• Crazy move, almost work.

[PlanetCNC]

Those commands work perfectly. Did you altered them with scripts?

[tantemay]

I have not changed the scripts.
I have to install the latest version anyway.
Then think it will work again, I hope.

Can I export the settings and import them in the latest version? Or does that also affect the scripts?
I haven't done that before.

[PlanetCNC]

You can export/inport settings between TNGv2 versions.
You can not import setting from old TNG. Well, you can but not all settings are imported correctly and there are many new ones.

Scripts are just files in "Scripts" folder. Scripts from old TNG do not work with TNGv2.

[mactec54]

I have not changed the scripts.
I have to install the latest version anyway.
Then think it will work again, I hope.

Can I export the settings and import them in the latest version? Or does that also affect the scripts?
I haven't done that before.

How are you using them post your code you may not have it in the correct format

[tantemay]

I installed the latest version today, now it works.

[tantemay]

Is it possible to have the axes run in a certain order with a G28 or G30 command? Because if everyone drives at the same time, a collision with my vise can occur. I always have to move the Z axis all the way up and only then can I execute the G28 command.

[maki]

I think that in manual of G-code page17 explains using G28 & G 30 code. Probabbly you can edit in "options-scripts" behavior of both codes.
If I am wrong please correct me.
rg

[PlanetCNC]

Google g91 g28 z0. It might be what you want.

[tantemay]

oh I'm stupid. I could have thought.

Thanks for getting started