Laser cutting PostProcessor

Results 1 to 10 of 10

Thread: Laser cutting PostProcessor

  1. #1
    Member Anriro's Avatar
    Join Date
    Feb 2019
    Posts
    56
    Downloads
    0
    Uploads
    0

    Default Laser cutting PostProcessor

    Can I make a postprocessor for laser cutting in ArtCam, or Vectrics? What would the laser (which is connected to the PWM output of the spindle) be switched off at the time of transition?

    I can not find a program in which you can generate the g-code for laser cutting.

    Similar Threads:


  2. #2
    Moderator PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    466
    Downloads
    0
    Uploads
    0

    Default Re: Laser cutting PostProcessor

    There is really no difference between laser and spindle. They are controlled the same way.



  3. #3
    Member Anriro's Avatar
    Join Date
    Feb 2019
    Posts
    56
    Downloads
    0
    Uploads
    0

    Default Re: Laser cutting PostProcessor

    This is clear. But in the control program, the spindle turns on at the beginning, and turns off at the end of the whole program !!! But it is necessary that he turn on only when the laser approaches the desired cutting point, and turn off at the output of the part. Do you understand?



  4. #4
    Moderator PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    466
    Downloads
    0
    Uploads
    0

    Default Re: Laser cutting PostProcessor

    This is an easy change. I will make them for Vectric. ArtCAM software has been discontinued since 2018.



  5. #5
    Member Anriro's Avatar
    Join Date
    Feb 2019
    Posts
    56
    Downloads
    0
    Uploads
    0

    Default Re: Laser cutting PostProcessor

    When will he be ready? I did not find it in the new version of TNG.



  6. #6
    Moderator PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    466
    Downloads
    0
    Uploads
    0

    Default Re: Laser cutting PostProcessor

    Vectric Aspire v10.019 update which fixes some bugs was just released. It fixes some bugs in their postprocessor engine. I can start working on them now.



  7. #7
    Member Anriro's Avatar
    Join Date
    Feb 2019
    Posts
    56
    Downloads
    0
    Uploads
    0

    Default Re: Laser cutting PostProcessor

    Can you do it in artcam? this is done in 5 minutes.



  8. #8
    Member Anriro's Avatar
    Join Date
    Feb 2019
    Posts
    56
    Downloads
    0
    Uploads
    0

    Default Re: Laser cutting PostProcessor

    I did it myself, it takes even less than 5 minutes. I don’t understand what difficulties you had.



  9. #9
    Moderator PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    466
    Downloads
    0
    Uploads
    0

    Default Re: Laser cutting PostProcessor

    Main difficulty is, that ArtCAM is discontinued since 2018. I don't have it and it no longer exists.
    But why are you asking me to do something that you can do yourself in 5 minutes?




  10. #10
    Member Anriro's Avatar
    Join Date
    Feb 2019
    Posts
    56
    Downloads
    0
    Uploads
    0

    Default Re: Laser cutting PostProcessor

    Because when I asked, thought it was difficult. And then I tried it and it turned out easy. True, I'm not sure that it will work correctly in 100% of cases.

    In addition, you have written that MK3 / 4 can be used with a laser, although it is not written anywhere how to do it. Have to come up with something yourself.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Laser cutting PostProcessor

Laser cutting PostProcessor

Laser cutting PostProcessor