TGNv2 and the Output Board. Settings: Spindle 0-10V

Results 1 to 5 of 5

Thread: TGNv2 and the Output Board. Settings: Spindle 0-10V

  1. #1
    Member tantemay's Avatar
    Join Date
    Nov 2015
    Location
    Warendorf
    Posts
    257
    Downloads
    0
    Uploads
    0

    Default TGNv2 and the Output Board. Settings: Spindle 0-10V



  2. #2
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    1295
    Downloads
    0
    Uploads
    0

    Default Re: TGNv2 and the Output Board. Settings: Spindle 0-10V

    Frequency, 1500Hz, 0 step width



  3. #3
    Member tantemay's Avatar
    Join Date
    Nov 2015
    Location
    Warendorf
    Posts
    257
    Downloads
    0
    Uploads
    0

    Default Re: TGNv2 and the Output Board. Settings: Spindle 0-10V

    I feel a bit fooled.
    At frequency I can enter Max. and Min.,frequency and the Step With.

    For PWM, I can specify the frequency but not the step with.

    So, I ask again for the settings for a 400hz spindle with 3,000 RPM @ 50hz

    The inverter is correctly configured, which was previously synonymous with the 10v signal, easily.

    Last edited by tantemay; 11-29-2019 at 12:42 PM.


  4. #4
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    1295
    Downloads
    0
    Uploads
    0

    Default Re: TGNv2 and the Output Board. Settings: Spindle 0-10V

    Settings for our output board are:
    Use Frequency = checked
    Freq Min = 0
    Freq Max = 1500
    Step Width = 0



  5. #5
    Member tantemay's Avatar
    Join Date
    Nov 2015
    Location
    Warendorf
    Posts
    257
    Downloads
    0
    Uploads
    0

    Default Re: TGNv2 and the Output Board. Settings: Spindle 0-10V

    Thank you.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

TGNv2 and the Output Board. Settings: Spindle 0-10V

TGNv2 and the Output Board. Settings: Spindle 0-10V