- TNGv2 Program stopping in simulation [SOLVED]
-
Member
TNGv2 Program stopping in simulation [SOLVED]
I have encountered a weird problem. When I execute any gcode using the simulation it always stops at line 135. I have tried this with 2 different gcode files and it does the same thing. Any ideas?
These are both files that I Have actually run on my machine in the past.
Cheers
Simon
Similar Threads:
Last edited by PlanetCNC; 11-06-2019 at 03:38 AM.
-
-
Member
Export your profile and send zip file to our email. Also include gcode.
-
Member
Re: TNGv2 Program stopping in simulation
Thank you, I have sent them.
-
Member
Re: TNGv2 Program stopping in simulation
This is a bug in simulation mode. It will be fixed in next release by end of this week.
- TNGv2 Program stopping in simulation [SOLVED]
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Reply with Quote
![TNGv2 Program stopping in simulation [SOLVED]](https://www.industryarena.com/images/cncarena/footer2l_logo.jpg){kind=logo}
![TNGv2 Program stopping in simulation [SOLVED]](https://www.cnczone.com/forums/images/cnczone.png)
