Upgrading 3020T with MK2 trying to connect stock spindle

Results 1 to 2 of 2

Thread: Upgrading 3020T with MK2 trying to connect stock spindle

  1. #1
    Registered
    Join Date
    Sep 2014
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Upgrading 3020T with MK2 trying to connect stock spindle

    I am upgrading my 3020T with a Planetcnc MK2 and was wondering if I can connect my stock spindle to the board with a motor driver board or do I need some other board, also is it possible to use the stock spindle controller that came with the machine?



  2. #2

    Default Re: Upgrading 3020T with MK2 trying to connect stock spindle

    Not familiar with the 3020T but I believe the following link will help

    https://planet-cnc.com/using-output-...c-controllers/



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Upgrading 3020T with MK2 trying to connect stock spindle

Upgrading 3020T with MK2 trying to connect stock spindle