TNG Progress - Page 2

Page 2 of 6 FirstFirst 12345 ... LastLast
Results 21 to 40 of 105

Thread: TNG Progress

  1. #21
    Member Anriro's Avatar
    Join Date
    Feb 2019
    Posts
    76
    Downloads
    0
    Uploads
    0

    Default Re: TNG Progress

    SkiPatrol

    ?????? ???????? ????????. )



  2. #22

    Default Re: TNG Progress

    @ Anriro I saw your video from another thread and I now understand ... hopefully v2 will solve that for you. PlanetCNC is fully committed on delivering TNGv2 and I trust that as soon as they can provide us with a delivery date they will. I am really happy with the current version of TNG and I have been able to do some amazing things with it. To think that TNGv2 is going to be even better and run natively on my Mac is just phenomenal. Wish I could download it today.

    Last edited by SkiPatrol; 06-19-2019 at 10:38 PM.


  3. #23
    Member
    Join Date
    Jun 2017
    Location
    United States
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by PlanetCNC View Post
    There were lots of complaints about toolchange. TNG can handle every ATC imaginable but scripting was required. TNGv2 will have standard settings for most common toolchange procedures. Advanced users can still use scripting.

    Did I mentioned that TNGv2 will run in Windows PC, Linux PC, Apple Mac (Sierra of newer) and Raspberry Pi? Yes, Apple users finally got good CNC software.
    RPi version is specially optimized and according to out tests and reports from beta testers is very stable and without any significant drawbacks.

    Currently I'm working on image processing and generating g-code from it. Intent is, to use photos or drawings and create g-code that can be used for CNC and laser type machines.

    In previous post I forget to mention that g-code is also compatible with all major 3D printer slicers.

    There are just so many thing and it is impossible to mention all. TNGv2 wil not be just a little better.

    I really thought that I could pull all this until February. I was wrong. We are a small team and if flue season hits hard on us then it shows. So don't worry about our company. We are working really hard and if sometimes we do not respond or we are to vague then it is because we work too hard, not because we do not care.

    Just remembered - we have wireless MPG pendants specially made for TNGv2 already on stock. We'll publish some photos later. I think they are awesome.
    Are we able to run an istance of TNG on the Pi and our PC with the same license? I’d like to try running it in a pi but don’t want to have to transfer the license every time, just in case the Lo isn’t stable enough for my liking.



  4. #24
    Member Gnewko's Avatar
    Join Date
    Aug 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: TNG Progress

    Hi, Is there any news about the TNG progress? Its already October 2019 ...



  5. #25
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    1295
    Downloads
    0
    Uploads
    0

    Default Re: TNG Progress

    PlanetCNC TNG V2 beta version will be released at the end of this month.



  6. #26
    Member Gnewko's Avatar
    Join Date
    Aug 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: TNG Progress

    That's great news! Thanks for information.



  7. #27
    Member JerryBurks's Avatar
    Join Date
    Aug 2011
    Location
    USA
    Posts
    998
    Downloads
    0
    Uploads
    0

    Default Re: TNG Progress

    Quote Originally Posted by PlanetCNC View Post
    PlanetCNC TNG V2 beta version will be released at the end of this month.
    Got a sneak preview of the changes? Especially the support of rotary machining (incl. graphical preview) and making the transformation matrix "stick" when the program is closed like the old software?

    Puzzle, Finger Joint, Maze and Guilloche freeware at https://fabrikisto.com/tailmaker-software/


  8. #28
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    1295
    Downloads
    0
    Uploads
    0

    Default Re: TNG Progress

    Graphical preview of rotary axes is implemented.
    Transformation stay active when g-code program is reloaded. It can also be persistent between software restarts.



  9. #29
    Member JerryBurks's Avatar
    Join Date
    Aug 2011
    Location
    USA
    Posts
    998
    Downloads
    0
    Uploads
    0

    Default Re: TNG Progress

    Quote Originally Posted by PlanetCNC View Post
    Graphical preview of rotary axes is implemented.
    Transformation stay active when g-code program is reloaded. It can also be persistent between software restarts.
    Great. I can't wait to try it out....

    Puzzle, Finger Joint, Maze and Guilloche freeware at https://fabrikisto.com/tailmaker-software/


  10. #30
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    1295
    Downloads
    0
    Uploads
    0

    Default Re: TNG Progress

    Screenshot
    TNG Progress-clipboard01-jpg

    Attached Thumbnails Attached Thumbnails TNG Progress-clipboard01-jpg  


  11. #31

    Default Re: TNG Progress

    Couple of questions...

    Are the change notes posted somewhere? I didn't see them on this forum or the Planet-CNC.com website.

    Also, if V2 is still in beta, why isn't V1 still available for download? I would think that users like myself could potentially need to revert to V1 if issues are found in V2.



  12. #32
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    1295
    Downloads
    0
    Uploads
    0

    Default

    Everything is changed so change log isn't really applicable.

    Status is beta until cycles are completed.
    Untill then you can get link to previous TNG version from our support.



  13. #33
    Member
    Join Date
    May 2008
    Location
    uk
    Posts
    266
    Downloads
    4
    Uploads
    0

    Default Re: TNG Progress

    Is G76 implemented, because TNG v2 is throwing this error - "Word 'I' without command that uses it"

    EXAMPLE CODE:

    (PLANETCNC-TNG LINUX-CNC)
    (ECAM V4 ***LATHE*** )
    (CREATED ON 28/10/2019 AT 23:28)
    (PART DESCRIPTION: BRASS PILLAR)
    (PROG NUMBER: 1)
    (STOCK O/D: 7.000)
    (STOCK I/D: 0.000)
    (STOCK LENGTH: 15.000)

    (------------------ TOOL LIST ------------------)
    (TOOL:EXTERN THREAD TOOL )
    (-----------------------------------------------)

    (SETUP 1)

    G08 G18 G21 G54 G61 G80 G90

    (M7 X 1)
    (EXTERN THREAD TOOL )
    (MAX Z TRAVEL: 1.000)
    (MIN Z TRAVEL: -10.000)
    (MAX X TRAVEL: 4.000)
    (MIN X TRAVEL: 2.887)

    G94 T15 G43 H15 M6
    G97 S600 M3 G04 P1 M8
    G0 X4.000 Z1.000
    G76 P1.000 Z-10.000 I-0.500 J0.168 K0.613 E0.613 H2 L2 Q29.4 R1.7
    G0 X4.000 Z1.000
    G53 X23.000 Z112.000
    M5
    M9
    M2



  14. #34
    Member JerryBurks's Avatar
    Join Date
    Aug 2011
    Location
    USA
    Posts
    998
    Downloads
    0
    Uploads
    0

    Default Re: TNG Progress

    Thanks, just downloaded and tried in simulation mode. Looking good so far. Will try tomorrow on the machine.
    Questions and some beta findings:
    - Same license info as for the V1 version, I guess?
    - The whole speed calculation and lookahead thing seems to have changed. Should I just use the defaults that came with the download?
    - I am missing the button from the old CNC-USB software to set all positions to zero. Can I get that somehow back?
    - Whe I click "Check for updates" it tells me that I still have the 2018 version and should update to the 2019 version, although I definitely have the 2019 version. So, the update check does not work properly.
    - The helpfile/user manual and g-code manual menu items do not work.
    - It shows "Revert to V1" in the machine menu. Does that mean "Revert to TNG V1" or is it "Revert to CNC-USB" ? I would hate to update if I don't have the option to go back to CNC-USB if something does not work for me.

    Puzzle, Finger Joint, Maze and Guilloche freeware at https://fabrikisto.com/tailmaker-software/


  15. #35
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    1295
    Downloads
    0
    Uploads
    0

    Default Re: TNG Progress

    G76 is a cycle. There are some issues with cycles and we need a week or so to finish them.



  16. #36
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    1295
    Downloads
    0
    Uploads
    0

    Default Re: TNG Progress

    - Same license as TNGv1. If you have old CNCUSB license then write to support to get TNGv2 license.

    - Defaults lookahead/blend settings should be fine for most users.

    - There is a button to set XY work position to zero and Z work position to zero because usually work position is set separately for Z. However in TNGv2 you can create custom buttons and/or change behavior of most machine related commands.

    - Check for updates needs to be updated. I simply forgot.

    - I will check why manuals don't work. There should be 3 manuals in setup file.

    - Revert to V1 means go back to Mk1 CNCUSB. Make sure you follow instructions how to properly use this.
    https://planet-cnc.com/updating-plan...-tng-software/



  17. #37
    Member
    Join Date
    Apr 2013
    Location
    Italia
    Posts
    110
    Downloads
    0
    Uploads
    0

    Default Re: TNG Progress

    Hello,
    I downloaded TNG V2 beta but the software installation is not clear to me; I noticed that the executable contained in the download is executed directly without installation ... maybe because I have already installed the V.1? Perhaps the contents of the zip should be copied to the V1 folder replacing the original files? in this case, is the software localization still possible with the txt files contained in the lang folder?
    Thanks



  18. #38
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    1295
    Downloads
    0
    Uploads
    0

    Default Re: TNG Progress

    You are right. There was a problem in publish script and I accidentally uploaded update files and not whole installation. This should be fixed now. Thank you for letting me know.

    @JerryBurks - this should also fix "user manual" issue and "check for updates"



  19. #39
    Member
    Join Date
    Apr 2013
    Location
    Italia
    Posts
    110
    Downloads
    0
    Uploads
    0

    Default Re: TNG Progress

    Excellent, downloaded and installed ... thanks



  20. #40
    Member
    Join Date
    Apr 2013
    Location
    Italia
    Posts
    110
    Downloads
    0
    Uploads
    0

    Default Re: TNG Progress

    Hello,
    TNG V.2: error detected with the M3 and M5 spindle commands. Is there something wrong with my configuration?
    TNG Progress-m3-jpg
    TNG Progress-m5-jpg
    TNG Progress-spindle-jpg



Page 2 of 6 FirstFirst 12345 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

TNG Progress

TNG Progress