Reply with QuoteWhat is G41.1?
Most controls use G41 D#
g41 g42
Why in this program does not work g41.1 ? No compensation for tool radius!
soft - TNG
G90G80G21G49
M6 T1
G41.1 D1.5
G43 H1 G0Z50.0000
M3 S24000
G0 X0 Y0
G1 Y100
G1 X100
G1 Y0
G1 X0
M5
M30
Re: g41 g42
What is G41.1?
Most controls use G41 D#
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Re: g41 g42
There is a bug and G41 is not implemented in latest TNG version.
Re: g41 g42
really want to swear.
will it be corrected?
Re: g41 g42
And your motherboard has very, very big problems with noise immunity, why did you not do LAN in MK3 / 4? wanted to save money? very bad decision!
Re: g41 g42
If you only knew how much I suffered with your controller and TNG
Re: g41 g42
G CodesOriginally Posted by ger21
I wondered what G41.1 and G42.1 were also.
Re: g41 g42
? ?? ?? ????? ?????., ???? ? ??? ????? ????????? ????????
Thank you for understanding )
Last edited by Anriro; 04-13-2019 at 02:23 AM.
Re: g41 g42
We are working with mathematicians from Irnas institute on new G41 implementation. It should be better that any other existing and will include advanced features such ad dogbones and start/end tangent for cutting internal shapes. And most important - no more non logical leadin/leadout moves.
Regarding gerber files - this import module was never meant for pcb cutout. But I understand that keepout layer could be used for this and I'll try to add new "Cutout" option.
@ger21
G41.1 is from RS-274 specification (used in LinuxCNC). It is for cutter compensation with dynamic diameter. See this:
G Codes
Re: g41 g42
When is the update planned?
Re: g41 g42
I'd thought it's a postprocessor issue. The G41/G42 offset is a basic feature of control.
The G41/G42 isn't needed in NC code if the software could calcualte the compensation, then the issue could be avoided temporarily.
Re: g41 g42
PlanetCNC. Still have a question. Why, after losing the connection, are the working coordinates reset, while all other coordinates are not reset? Can I make the working coordinates remain the same?
Re: g41 g42
what the heck is that?
I just write Z10 (to move the spindle) and press the enter, and it will produce some garbage? before this was not!
If you look to see the active g-code list .... G02 is active... it requires MDI code to perform an arc
... you need to add G00 to MDI input to place it in rapid.. or G01 for a linear feed move ie G0 Z10. or G1 Z10. F1000.
