- Emco retrofit
-
Member
Emco retrofit
Hi - Wish to retrofit an Emco Compact 5 CNC with tool changer and an Emco F! CNC. If you have done these conversions with Planet CNC I would be most grateful for any advice. Particularly with spindle speed control, encoder for screw cutting and turret control. I will probably use the Leadshine integrated BoB type stepper controllers.
Similar Threads:
-
- Emco retrofit
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules