Help configure Planet CNC software to controll the controller

Results 1 to 2 of 2

Thread: Help configure Planet CNC software to controll the controller

  1. #1
    Registered
    Join Date
    Jul 2015
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Help configure Planet CNC software to controll the controller

    Dear friends,

    I need your help to setup my cncusb controller card to control the VFD.
    - Controller: USBCNC card (see picture)
    - VFD: HY01D511B, 110V-110V, 1.5KW, 14A (Huanyang)
    - Software: CNC USB (Planet cnc):
    SW: 2.10.1204.201;
    HS: 2012.02.10;
    SN: 59665 DIY
    The manual shows that this command "M S24000" should be put in MDI and when apply ENTER it should configure the controller in order get 5v between the GND and AVI but when I apply ENTER I still have "0" volts between GND and AVI. I connected everything well but nothing is happened.

    I attach some pictures for your reference:


    Help configure Planet CNC software to controll the controller-test-result-jpg


    Help configure Planet CNC software to controll the controller-controller-jpg

    Thank you in advance

    Gautier

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Help configure Planet CNC software to controll the controller-test-result-jpg   Help configure Planet CNC software to controll the controller-controller-jpg  


  2. #2
    Registered PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    175
    Downloads
    0
    Uploads
    0

    Default Re: Help configure Planet CNC software to controll the controller

    Please read:

    You have one of Chinese counterfeit controllers: Planet CNC • View topic - BEWARE - Chinese counterfeits

    They are usually distributed trough Ebay, AliExpress, BangGood etc..

    We do not make, sell or support these boards. Therefore, we cannot be responsible for any hardware or license malfunction. You should turn to support at the merchant that sold you this product.

    These boards that are knock-offs, are based on our first Mk1 controller which is now an obsolete and not supported item.

    Many of its features are outdated and there is no software/firmware development.
    It has a small buffer and weak processor which reflects as a bad machine performance.



    These counterfeited controllers many times change serial number(after firmware update) since hardware was cracked the wrong way. If your controller changes its serial number, this means that license will become invalid. And since this is not our hardware we cannot guarantee anything.


    You can purchase original controller and/or license in our web shop:
    PlanetCNC Shop


    P.S.: With our original controllers you can use our more advanced motion software PlanetCNC TNG:
    https://planet-cnc.com/list-essentia...tng-tutorials/

    Last edited by PlanetCNC; 11-07-2018 at 09:11 AM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help configure Planet CNC software to controll the controller

Help configure Planet CNC software to controll the controller