Can't get anything to move

Results 1 to 3 of 3

Thread: Can't get anything to move

  1. #1
    Registered
    Join Date
    May 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Can't get anything to move



  2. #2
    *Registered User* bencherry's Avatar
    Join Date
    Nov 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Can't get anything to move

    under file, settings , motor drivers. I had to adjust the current from .5 amps to 1 amp, and the microstepping from 1/8 to 1/4 to get my 3040t to move.



  3. #3
    Moderator PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    398
    Downloads
    0
    Uploads
    0

    Default Re: Can't get anything to move

    Which motion control software from PlanetCNC do you use?
    Values under axis coordinate value display are changing when jogging?
    Is yellow tool/cone in 3D display moving accordingly if you use jogging keys?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Can't get anything to move

Can't get anything to move

Can't get anything to move