Mk3DRV Upgrade Help

Results 1 to 4 of 4

Thread: Mk3DRV Upgrade Help

  1. #1
    Member
    Join Date
    Nov 2014
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default Mk3DRV Upgrade Help

    Hi Folks I have just purchased an Mk3DRV

    I need help with the wiring of this board to replace the Chinese clone in my 6090
    any help would be appreciated
    I did send an image of the controller when asking about the upgrade
    and the upgrade instructions on Planet CNC are for the older control box

    Regards Tom

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Mk3DRV Upgrade Help-img_0188-jpg   Mk3DRV Upgrade Help-img_0189-jpg   Mk3DRV Upgrade Help-img_0190-jpg   Mk3DRV Upgrade Help-controler-jpg  



  2. #2
    Member
    Join Date
    Nov 2014
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default Re: Mk3DRV Upgrade Help

    OK got this installed and working Thanks to Planet CNC Tech Guys

    Next Question Stepper Current I Have 4 57 two-phase 3A 150N.cm Steppers and work well
    The Board Gets Very Hot and i am a little concerned if the on-board Stepper Drivers are being over worked
    The Case has its own Drivers can these be used instead of the boards drivers ?




  3. #3
    Member PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    1295
    Downloads
    0
    Uploads
    0

    Default Re: Mk3DRV Upgrade Help

    You could lower driver current value in settings: File/Settings/Motor Drivers -> Current



  4. #4
    Member
    Join Date
    Nov 2014
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default Re: Mk3DRV Upgrade Help

    Quote Originally Posted by PlanetCNC View Post
    You could lower driver current value in settings: File/Settings/Motor Drivers -> Current
    Now it won’t recognise the controller and driver is latest one installed


    Sent from my iPhone using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mk3DRV Upgrade Help

Mk3DRV Upgrade Help