Obtain the book CNC Programming by Peter Smid.
Al.
I can not find in any way what are the current g code(On the screen of the program)
For example: G61 or G64
I would also like to ask about the tool
can i use: T1-T3 .... (with length and diameter parameters) offset G40 G41 G42
P.S. Need a manual on the available G code
Similar Threads:
Obtain the book CNC Programming by Peter Smid.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
You can find anything you want to learn about G-Code on the internet
First to help with the G-Code, what control are you using , not all G-Codes are supported, some controls use different G-Codes, and format
T1 - T3 is correct normally used like this if you have a tool changer T1M6
Work off sets are G54 to G59 Etc depending on the control
G40 G41 G42 is for cutter compensation this is not used to set tool offsets
Tool offsets are set in your tool table ? tool offset page in your control
Mactec54
I know what they mean
I do not see them on the machine control panel
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.