- Configurations issues with Planet-CNC and DQ542MA.
-
Member
Configurations issues with Planet-CNC and DQ542MA.
Hi this is my first post and I admit I am a CNC NOOB.
I am building an OpenBuilds CNC MiniMill and I am having some issues wiring/configuring. It appears that whatever µstep configuration I am using, I am getting the same translation (I only have the x-axis set up currently).
You can see my configuration here.
Is there any more information on how to set this up (other than the Planet-CNC tutorial which does not really go much into settings).
Similar Threads:
-
-
Member
Re: Configurations issues with Planet-CNC and DQ542MA.
UPDATE: I was able to address my issue. As it turns out, you have to cycle power to the DQ542MAs to change switch settings. This is why I was seeing no change in displacement from my previous runs.
- Configurations issues with Planet-CNC and DQ542MA.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules