Spindle synchronisation with PlanetCNC TNG

Results 1 to 6 of 6

Thread: Spindle synchronisation with PlanetCNC TNG

  1. #1
    Moderator PlanetCNC's Avatar
    Join Date
    Mar 2017
    Location
    Slovenia
    Posts
    248
    Downloads
    0
    Uploads
    0
    Last edited by PlanetCNC; 08-31-2017 at 09:11 AM.


  2. #2
    *Registered User* Zdeny's Avatar
    Join Date
    Nov 2018
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Spindle synchronisation with PlanetCNC TNG

    Dobrý den,
    Prosím o radu co vše si mám po?ídit a zajistit proto aby jsem mohl používat siichronizaci v?etena u soustruhu? Mám MK3/9 ?ídící desku, v?etenový motor je asynchronní motor 11kW , mám koupen frekven?ní m?ni? 15KW.

    Ptám se co dalšího musím po?ídit a jak to konstruk?n? provést a zapojit aby bylo možné synchronizovat v?eteno a otá?ky a k tomu i posuvy suportu ?
    D?kuji p?edem za odpov?? Zden?k Lang

    Hello,
    Please advise what all I need to do to ensure that I can use the sychronization of the spindle at the lathe? I have a MK3 / 9 control board, a spindle motor is an asynchronous 11kW motor, I have bought a 15KW frequency inverter.

    Do I ask what else to do and how to construct and engage it in order to synchronize the spindle and the speed and also the support shifts?
    Thanks in advance for the answer Zden?k Lang



  3. #3
    Member
    Join Date
    May 2008
    Location
    uk
    Posts
    211
    Downloads
    3
    Uploads
    0

    Default Re: Spindle synchronisation with PlanetCNC TNG



  4. #4
    *Registered User* Zdeny's Avatar
    Join Date
    Nov 2018
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Spindle synchronisation with PlanetCNC TNG

    Quote Originally Posted by blowlamp View Post

    This link is inoperative

    This link is inoperative.

    I was only looking at this,

    https://planet-cnc.com/controlling-s...-output-board/

    but this does not solve the wiring and the spindle positioning fonging instructions



  5. #5
    Member
    Join Date
    May 2008
    Location
    uk
    Posts
    211
    Downloads
    3
    Uploads
    0

    Default Re: Spindle synchronisation with PlanetCNC TNG

    Quote Originally Posted by Zdeny View Post
    This link is inoperative

    This link is inoperative.

    I was only looking at this,

    https://planet-cnc.com/controlling-s...-output-board/

    but this does not solve the wiring and the spindle positioning fonging instructions


    Try again here.



  6. #6
    Member
    Join Date
    Oct 2017
    Posts
    20
    Downloads
    0
    Uploads
    0

    Default Re: Spindle synchronisation with PlanetCNC TNG

    Hi.
    I can’t understand which pin IDX?
    i have an encoder (https://ru.aliexpress.com/item/32725...chweb201603_52)
    Looks like he doesn't have this pin.
    I can’t find an example of an encoder with such a pin in shop
    If I bought the wrong model, can I ask for an example of the correct model?

    Last edited by R2D3; 08-07-2019 at 02:39 AM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Spindle synchronisation with PlanetCNC TNG

Spindle synchronisation with PlanetCNC TNG