PicStep Moves While Router Running Problem SORTED

Results 1 to 3 of 3

Thread: PicStep Moves While Router Running Problem SORTED

  1. #1
    Registered
    Join Date
    Aug 2007
    Location
    za
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default PicStep Moves While Router Running Problem SORTED

    Sorry its been so long since i last posted ;-) To busy cutting things out. I had a job for a school. Knowing that sometimes i would loose my Zero Setting due to interference. It was only caused while using a router or something that sparks a lot on the comutator. Most other jobs i have been using i high speed drill which did not give me problems. After i screwed up the job i had to fix it and sort out the missing steps. Been in the tv repair business i started tracing the fault. 1st i twisted the bi-polar wires to the motor. No Better 2 cut out a complete filter circuit from a Sony TV & placed inline with my supply. No Better, 3 Earthed the Machine,PC & Control Board, No Better, Last ;-) 2 x 10 nf caps 1 on the input & 1 on the step control of the Picstep Boards DOWN TO GROUND. I hope this helps anyone having similar problems. Now I can frigging use my welding machine on the same supply and my motors DO NOT MOVE EVEN 1 STEP. Good luck all.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jun 2006
    Location
    Hong Kong
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Thanks for the tips!



  3. #3
    Member robe_uk's Avatar
    Join Date
    Apr 2005
    Location
    Northern Ireland
    Posts
    248
    Downloads
    0
    Uploads
    0

    Default

    Worked for me

    I'll get it finished sometime after I start it.....


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

PicStep Moves While Router Running Problem SORTED

PicStep Moves While Router Running Problem SORTED

PicStep Moves While Router Running Problem SORTED