V Carve's default feedrates are rarely ideal. Different materials, and different machines, even different holddown methods can require different feedrates.
I am using the Shark Pro CNC machine alongside VCarve Pro 6.5. VCarve Pro has bit already loaded in and I can choose from those. My question is I would like to get this bit here:
https://www.amazon.com/Yonico-31210-...33&sr=8-6&th=1
It is a 1/8" endmill 2 flute upcut bit. Can I just use the default 1/8" endmill selection from inside VCarve Pro for the speeds and feeds or do those need to be changed? Thank you.
Similar Threads:
V Carve's default feedrates are rarely ideal. Different materials, and different machines, even different holddown methods can require different feedrates.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I am mainly using poplar wood with the above mentioned bit. Suggestions of feeds and speeds or would the default be good from VCarve?