Maho Graziano GR300 C and life tools

Results 1 to 2 of 2

Thread: Maho Graziano GR300 C and life tools

  1. #1
    Registered
    Join Date
    Mar 2006
    Location
    Poland
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default

    I've got Maho Graziano GR300C lathe (432T-10) with driven tools. But I don't know how to start driven tools. In my operating manual is missing chapter 15: C Axis. Could somebody send to me the missing chapter or to write what to change in:
    1. constants,
    2. how to place the driven tool and
    3. to give examples of the program?

    Regards
    tschaya



  2. #2
    Registered
    Join Date
    Mar 2006
    Location
    Poland
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by tschaya View Post
    I've got Maho Graziano GR300C lathe (432T-10) with driven tools and C axis but I have no examples or manual. I can only drill - as in the dividing head. And when I use the G37 mode, I can only milling useless spiral.

    I ask for a sample program (G-code) , such as milling a square (or rectangle, hexagon) on the end of the shaft. Or another example of using the C-axis with driven tools.

    Regards
    tschaya




Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Maho Graziano GR300 C and life tools

Maho Graziano GR300 C and life tools

Maho Graziano GR300 C and life tools