Buenos días nos pasa lo mismo con nuestra CNC, ¿podrías ayudarnos para saber cual es el problema?
661218637
Hello,
Sorry for my bad English!
I need help for my HY02D223B inverter
During program execution, the inverter shows an E.L.u.n error and the spindle stops rotating.
The problem does not have a clear recurrence, it can run for 2 minutes and manifest itself, and it can take 2 months without manifestation, under different cutting / punching loads.
After the restart, everything starts anew, and the problem may or may not be repeated.
I have had this machine for 5 years, but in the last one it started to make me this problem.
I haven't changed a thing.
Everything is set up by the manufacturer of my CNC.
Similar Threads:
- Need Help - Amada RG 80 Error code 315 / Alarm code 315
- Error codes for SCM Record 310 NT Router Error code 075-MACHINE OFF
- Using g code on old router..WIll this code work?
- Need Help!- Has anyone ran into this error? Parasolid ® Kernel Interface Error: KI Error Code:58
- g code error with image to g-code
Buenos días nos pasa lo mismo con nuestra CNC, ¿podrías ayudarnos para saber cual es el problema?
661218637
That error is a low voltage input error. Check the voltage on your input lines, the VFD could also be dead due to some burned components
Mactec54