EBAY MACH3 5AXIS BOARD TO SUNFAR E300

[tobiascourt]

hope this helps

Similar Threads:

• Need Help!- Sunfar e300 settings from ebay 5 axis mach3 bob
• SUNFAR E300 FROZEN.
• Need Help wiring C11 to Sunfar e300 VCD to control my Spindle.
• Vfd spindle speed control through 0 -10v on bob with sunfar e300 and mach3
• Need Help!- Sunfar E300

[mactec54]

hope this helps

So what do you need the connection from the Breakout Board to the VFD Drive

Or the correct Parameters for the VFD Drive to run your spindle

[ericks]

I think he just gave information/help

[mactec54]

I think he just gave information/help

He posted this in another Thread he started, ( I cant understand the manual I have a 3.2kw spindle motor can anyone help please )

Then he started this thread so don't know what he wants if anything

[ericks]

He posted this in another Thread he started, ( I cant understand the manual I have a 3.2kw spindle motor can anyone help please )

Then he started this thread so don't know what he wants if anything

Sorry....i was unaware of his other post