positioning feed

Results 1 to 3 of 3

Thread: positioning feed

  1. #1
    narator's Avatar
    Join Date
    Dec 2007
    Location
    Bayern
    Posts
    198
    Downloads
    0
    Uploads
    0

    Default

    Hello
    Does anybody know where you can set the positioning feed of the rotation axis with 2,5D milling? ( Tcn 530)
    F999999 are a bit too much for me, I rather change it directly on the machine, but thats getting a bit too much for me now. wink.gif

    Thanks

    With best regards
    Narator



  2. #2
    Registered Yardman's Avatar
    Join Date
    Jun 2008
    Location
    Weinstadt
    Posts
    39
    Downloads
    0
    Uploads
    0

    Default

    Hello narator,

    Your feed is fixed programmed in a Macro!
    You can open the Macro EBN.OVM and search for "F99999".
    It works best, if you type in "ape +ebn" in the opened PEPS via the keyboard.
    Then you can change it as you like.
    I guess the PLANE cycle is used!
    Or give Camtek a quick call.

    Regards

    Yardman



  3. #3
    narator's Avatar
    Join Date
    Dec 2007
    Location
    Bayern
    Posts
    198
    Downloads
    0
    Uploads
    0

    Default

    Hello Yardman
    Thanks for your help!
    Works perfect!

    Best wishes Narator



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

positioning feed

positioning feed

positioning feed