Spring Loaded Collet

Results 1 to 4 of 4

Thread: Spring Loaded Collet

  1. #1
    Shabalala
    Guest

    Default Spring Loaded Collet

    Does anyone know what the deal with this:




    is? At 4:58, the operator put in a spring into the collet then tightens it. I'm not sure why tightening doesn't prevent any movement at all?

    Similar Threads:


  2. #2
    Member rcheli's Avatar
    Join Date
    Nov 2005
    Location
    USA
    Posts
    222
    Downloads
    0
    Uploads
    0

    Default Re: Spring Loaded Collet

    I'd say it's because it's not really tight. He pushed the bit far enough in so that the set screw is on the flat. But not tight on it.



  3. #3
    Member CitizenOfDreams's Avatar
    Join Date
    Nov 2012
    Location
    USA
    Posts
    1267
    Downloads
    4
    Uploads
    0

    Default Re: Spring Loaded Collet

    The set screw is not tightened on the cutter, it just prevents the cutter from falling out.



  4. #4
    Shabalala
    Guest

    Default Re: Spring Loaded Collet

    Understood! Thanks guys!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Spring Loaded Collet

Spring Loaded Collet