New to CNC

Results 1 to 2 of 2

Thread: New to CNC

  1. #1
    *Registered User* countilaw's Avatar
    Join Date
    Aug 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default New to CNC

    I am new here and very curious as to what kind of cnc machine I need. What I want to do is cut balsa wood and plywood parts for RC Planes. I need/want a least 900 mm deep and 600 mm wide. I am a little afraid of the Chinese machines I have found on ebay. However, I need to keep my budget at or about $3000. If getting a Chinese machine is all I can do, then I'm willing to change out the controllers.

    I can really use your suggestions on what I need and can get.

    Frank



  2. #2
    Registered
    Join Date
    Dec 2014
    Posts
    565
    Downloads
    0
    Uploads
    0

    Default Re: New to CNC

    If all you're going to do is cut balsa and plywood parts...look into the Shapeoko 3 machines. Carbide 3D



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

New to CNC

New to CNC