- UGS 2.0.7 SNAPSHOT driving GRBL gives error20 when sending T1M6
-
Member
UGS 2.0.7 SNAPSHOT driving GRBL gives error20 when sending T1M6
My UGS running computer died so I had to get a new computer and had to load the latest UGS on it.
My CNC router machine runs GRBL 1.1.
I think I have all the modifications applied to the new UGS that I had to my old UGS.
The machine moves and the probe module is working.
When I try to run a GCode file I get the following error.
{ERROR} An error was detected while sending 'T1M6'. (error:20)
The version I was running before must have just ignored this as all my gcode files have it in.
Am I missing something or do I need to change something?
Thanks
Similar Threads:
-
-
Member
Re: UGS 2.0.7 SNAPSHOT driving GRBL gives error20 when sending T1M6
Well I resorted to setting up Fusion to stop generating those commands and all is well. Probably should have done that in the first place.
- UGS 2.0.7 SNAPSHOT driving GRBL gives error20 when sending T1M6
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules