Need Help! Universal G-CODE sender (Visualizer) shows extra shapes

Results 1 to 9 of 9

Thread: Universal G-CODE sender (Visualizer) shows extra shapes

  1. #1
    Member mikeblankenship's Avatar
    Join Date
    Feb 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Smile Universal G-CODE sender (Visualizer) shows extra shapes

    Hi All,

    1st time poster here. My friend and I have just put together a Millwright Carve King
    and we have it working according to the manual.

    We are buying off the shelf ABS enclosures and then trying to mill circular holes in it.
    The software we use is as follows:

    1. ExpressPCB to generate the Mechanical DXF
    2. DXF2GCODE (Fri Oct 25 20:45:56 2019 +0200 $) to Import the DXF
    3. Universal G-CODE Sender (Product Version: Universal Gcode Platform 20190814)

    When I load the DXF file into DXF2GCODE it looks normal,
    I see 10 Shapes (all circular, I remove the outline). I then Export it to GCODE
    However when Import the GCODE file it shows an extra 5 circular shapes

    I have pictures attached. I also tried using 2 different software to generate the DXF file
    and same results

    Any help would be appreciated.

    Similar Threads:
    Attached Images Attached Images


  2. #2
    Member
    Join Date
    May 2005
    Location
    canada
    Posts
    1525
    Downloads
    0
    Uploads
    0

    Default Re: Universal G-CODE sender (Visualizer) shows extra shapes

    Please post the gcode file. Zip it if necessary.
    One possibility is the arcs are in R format instead of I+J format.
    I+J is more reliable .

    Anyone who says "It only goes together one way" has no imagination.


  3. #3
    Member mikeblankenship's Avatar
    Join Date
    Feb 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Universal G-CODE sender (Visualizer) shows extra shapes

    Hi, Here is the zipped file.
    Still trying to learn GCODE but I noticed it shows all the shaoes that are suppose to be there.
    I have compensation turned on, when I have it turned off it does the same thing.

    Thanks
    mike

    Attached Files Attached Files


  4. #4
    Member
    Join Date
    May 2005
    Location
    canada
    Posts
    1525
    Downloads
    0
    Uploads
    0

    Default Re: Universal G-CODE sender (Visualizer) shows extra shapes

    To the best of my knowledge grbl doesn't understand G41 or G42.
    Try setting your software to not output G41/G42.

    Anyone who says "It only goes together one way" has no imagination.


  5. #5
    Member
    Join Date
    Jul 2017
    Location
    Italy
    Posts
    90
    Downloads
    0
    Uploads
    0

    Default Re: Universal G-CODE sender (Visualizer) shows extra shapes

    Mine CNC support G41/G42 etc, but result is same.
    Seem dxftogcode added an extra arc with inversed signs.
    Universal G-CODE sender (Visualizer) shows extra shapes-snap-jpg

    Attached Images Attached Images


  6. #6
    Member
    Join Date
    May 2005
    Location
    canada
    Posts
    1525
    Downloads
    0
    Uploads
    0

    Default Re: Universal G-CODE sender (Visualizer) shows extra shapes

    disclaimer: I don't use dxf2gcode. I looked at it many years ago and found the output unreliable, but it's been revised many times since then.

    When CAM outputs G41/G42 the tool path is dependant on calling a diameter from a tool table. Otherwise the tool diameter will be zero and the part will be under/over size by the amount of the cutter radius. UGS should display an error when an unrecognised code is entered but it ignores them instead. I don't believe that's causing the phantom circles.

    My guess (and it is a guess) is instead of seeing a closed circle dxf2gcode is seeing an 359+ degree arc. For free CAD I've found QCad (community edition) to have the most reliable dxf output.

    Anyone who says "It only goes together one way" has no imagination.


  7. #7
    Member mikeblankenship's Avatar
    Join Date
    Feb 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Universal G-CODE sender (Visualizer) shows extra shapes

    Thanks for everyone's help. I disabled cutter compensation and now I am not getting those "Phantom" circles.
    I am also looking for a DXF2GCODE alternative



  8. #8
    Member
    Join Date
    May 2005
    Location
    canada
    Posts
    1525
    Downloads
    0
    Uploads
    0

    Default Re: Universal G-CODE sender (Visualizer) shows extra shapes

    Looking at a more recent (2017) release of dxf2gcode shows a lot of improvement from earlier versions. It still doesn't do basic 'mill things' like pocketing.

    I am also looking for a DXF2GCODE alternative
    Fusion 360 ?
    pros: Many tool path routines with fine tuning. Help and tutorials found everywhere. Free hobby version. Fairly intuitive for something this complex.
    cons: Software by subscription. Working off-line is possible for a few day stretches but it really is semi-cloud software. If CAD experience is limited the learning curve is a bit steep. Autodesk will do as they please, you don't own this software.

    Last edited by cyclestart; 02-19-2020 at 09:46 AM.
    Anyone who says "It only goes together one way" has no imagination.


  9. #9
    Member
    Join Date
    Jul 2017
    Location
    Italy
    Posts
    90
    Downloads
    0
    Uploads
    0

    Default

    SheetCAM could be a good alternative.
    It is cheap and powerfully on 2.5d cam.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Universal G-CODE sender (Visualizer) shows extra shapes

Universal G-CODE sender (Visualizer) shows extra shapes

Universal G-CODE sender (Visualizer) shows extra shapes