Full cnc controller - Page 4

Page 4 of 4 FirstFirst 1234
Results 61 to 70 of 70

Thread: Full cnc controller

  1. #61
    Registered sherr's Avatar
    Join Date
    Aug 2011
    Location
    Russia
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Isn,t any sources (not .hex) of this project - i am not PIC fan, i think that
    porting it to AVR will be interesting .

    sorry. I've found it.... but PICBasic to WinAVR -- not a light and fast way ///

    Last edited by sherr; 12-21-2011 at 09:14 AM.


  2. #62
    Registered
    Join Date
    Apr 2011
    Location
    italia
    Posts
    1
    Downloads
    0
    Uploads
    0

    Wink

    Hi, I built the card, now I have a configuration problem, I have the 200-step motor directly coupled to an axis of 1.25 mm pitch as I configure the parameters of the engine, thanks a lot sorry for English are Italian , Gianfranco greetings.



  3. #63
    Registered
    Join Date
    May 2012
    Location
    eua
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default Re: Full cnc controller

    Hello to all,

    I made the Arnauld CNC Controller.

    Everything seems fine, the motors move, but I cant load any gcode into the device.

    I think that the error are in the SD card filesystem, or the file name itself.

    Could someone give me a help how do you load the gcode in the device?

    Thank you very much.



  4. #64
    Registered
    Join Date
    Jul 2006
    Location
    UKRAINE
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: Full cnc controller



  5. #65
    Member moghul's Avatar
    Join Date
    Apr 2006
    Location
    PAKISTAN
    Posts
    85
    Downloads
    4
    Uploads
    0

    Default Re: Full cnc controller

    hi all
    if i want to make this cnc controller then where i fount its material. hardware and software.
    shabbir



  6. #66
    Member
    Join Date
    Apr 2010
    Location
    philippines
    Posts
    32
    Downloads
    0
    Uploads
    0

    Default Re: Full cnc controller

    Any eagle cad files here



  7. #67
    Member
    Join Date
    Apr 2010
    Location
    philippines
    Posts
    32
    Downloads
    0
    Uploads
    0

    Default Re: Full cnc controller

    This is another Full controller >>> with lcd also>>>



  8. #68
    Registered James Newton's Avatar
    Join Date
    May 2005
    Location
    USA
    Posts
    1397
    Downloads
    0
    Uploads
    0

    Default Re: Full cnc controller

    Wow. Anyone speak Russian? It would be nice to understand what compiler he used, etc...

    James hosts the single best wiki page about motors for CNC hobbyists on the net:
    http://techref.massmind.org/techref/io/motors.htm Disagree? Tell him what's missing! ,o)


  9. #69
    Registered
    Join Date
    Nov 2015
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Full cnc controller

    Good afternoon.

    Help me fix a bug in the program.

    I gathered this device on the breadboard on pic18f4620.

    Like the way it works, only doubles the menu arrow (CNC PARAMETERS)

    when choosing between paragraphs (TABLE / SPINDLE).

    And this error in all versions on pic18f4620 and it can be seen in Proteus.

    Maybe someone will be able to recompile the source code to fix?

    Who will tell me how is the recording on MMC MC56U032NCFA-QC ?

    Something I have not saved anything. Connected using a formatted FAT32, and she

    as it was empty because it does not have the coordinates.

    Tell me who is working you need to create one.

    Last edited by ROZARIO-36; 11-05-2015 at 01:26 PM.


  10. #70
    Member
    Join Date
    Apr 2009
    Location
    Peru
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Full cnc controller

    HOLA ESTOY HACIENDO UN PROYECTO PARECIDO PERO CON EL PIC 18F4550 AUN ME FALTA MUCHO LO QUE RIA PEDIR CUANTO COSTARIA QUE ME FASILITE EL CODIGO photo_2021-08-30_17-05-13.jpgphoto_2021-08-30_17-04-41.jpg



Page 4 of 4 FirstFirst 1234

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Full cnc controller

Full cnc controller