- Arduino Resolver Converter
-
Member
Arduino Resolver Converter
I have been experimenting with using an Arduino to convert Resolver to Quadrature. I have it working for three simultaneous channels (you might squeeze more out of a Mega, but the Duemillenove only has 6 A/D channels)
http://wiki.linuxcnc.org/cgi-bin/emc...atureConverter
Using one channel of that converter and a PWM to gate trapezoidal commutation patterns on Arduino DIO pins to drive that 6-wire International Rectifier IRAMS10UP60A single-chip power driver I have semi-successfully driven a 500W brushless AC resolver servo at 300VDC.
[nomedia="http://www.youtube.com/watch?v=oyeJfNg3NfQ"]YouTube- Arduino servo motor drive[/nomedia]
Similar Threads:
-
-
Member
great, could you give more infomation
thanks alot
-
Member
What details do you want? I thought the resolver converter was fairly well documented in the link.
-
*Registered User*
Re: Arduino Resolver Converter
Hello Dear Andypugh,
Can you please help to read the absolute angle of resolver through ATMEGA with digital readout 0-359 on every revolution?
Help please ...
- Arduino Resolver Converter
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules