CNC Xpro V3 with Estlcam


Results 1 to 3 of 3

Thread: CNC Xpro V3 with Estlcam

  1. #1
    Member
    Join Date
    Apr 2012
    Location
    U.K.
    Posts
    78
    Downloads
    7
    Uploads
    0

    Default CNC Xpro V3 with Estlcam

    Hi - I have just acquired an Openbuild C Beam with CNC Xpro V3. The Xpro is said to be compatible with Estlcam. I have licenced copy of Estlcam. Does this mean I can use the Estlcam control software by flashing the Xpro as one would an Arduino? Would be more than pleasantly surprised if it where that simple. Any advice appreciated.

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2012
    Location
    U.K.
    Posts
    78
    Downloads
    7
    Uploads
    0

    Default Re: CNC Xpro V3 with Estlcam

    Well it was that simple !!!
    Worked first time. It downloaded it from the Estlcam programme automatically. The features it donates are extensive and all free. (Bearing in mind a well spent £50 for the CAM, )
    I do have professional equipment, but have to say this control impresses me with it`s simplicity and ease of use.
    No connection with the company. Just an impressed old cynic.



  3. #3
    Member
    Join Date
    Apr 2012
    Location
    U.K.
    Posts
    78
    Downloads
    7
    Uploads
    0

    Default Re: CNC Xpro V3 with Estlcam

    Except I cannot get the probe to work. Connected to the green screw terminals GND and D3. Using input 7 in Estlcam.
    Any idea`s folks?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

CNC Xpro V3 with Estlcam

CNC Xpro V3 with Estlcam