I have an AutoCAD 3D model of an 892 here.
I don't know the exact weight, but they are probably about 7-8 lbs.
The "barrel" of a 690 is 3-3/8" long, and the bottom of the collet is 1-3/8" below that.
Does anyone have CAD drawings for the Porter/Cable 69x/89x router motors? Lacking that, can someone tell me the length of the 3.5" "barrel" portion of each?
I'm in the design phase, already have the K2CNC mount but not the router: need to know how much of it sticks down under the mount.
As long as I'm here, does anyone have an accurate number for the weight of each, motor only? The P/C site only shows them with various bases.
Similar Threads:
I have an AutoCAD 3D model of an 892 here.
I don't know the exact weight, but they are probably about 7-8 lbs.
The "barrel" of a 690 is 3-3/8" long, and the bottom of the collet is 1-3/8" below that.
Last edited by ger21; 01-14-2017 at 02:27 PM.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
The link is dead now, is there any chance you could please put a new one up, or send me the file? I'd greatly appreciate it. Thanks!
It would save me a ton of work, I'm about to model it up in Fusion360, but I'm just learning it, so it will take me a long time (although good practice). I wanted the router model for assisting in designing a dust boot for it.
I updated the link.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
You're awesome. It's a beautiful model, thank you!