Need Help! Tapered pocket


Results 1 to 3 of 3

Thread: Tapered pocket

  1. #1
    Member redbulljase43's Avatar
    Join Date
    Apr 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Cool Tapered pocket

    Please help have a solid model which has a tapered pockets of 1 deg also edges of part how do i do this in onecnc xr6.

    Similar Threads:


  2. #2
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    1567
    Downloads
    5
    Uploads
    2

    Default Re: Tapered pocket

    Look for a Setting for Draft Angle my guess. By the way how much did your onecnc software Cost?

    DJ



  3. #3
    Member wms's Avatar
    Join Date
    Mar 2003
    Location
    wyoming
    Posts
    927
    Downloads
    0
    Uploads
    0

    Default Re: Tapered pocket

    Depends on if you want to cut it with a Tapered mill. Or use a Ball mill and step down the face.

    Also if you have a 3 axis or 5 axis machine.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Tapered pocket

Tapered pocket