One cnc post for C Tek / CNT controller


Results 1 to 5 of 5

Thread: One cnc post for C Tek / CNT controller

  1. #1
    Registered
    Join Date
    Dec 2007
    Location
    England
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default One cnc post for C Tek / CNT controller

    I am looking for a post for the above controller. C Tek also know as a CNT Controller The machine goes under the brand name guise of 'powercentre' in the UK, all be it an optimistic name I have no idea if this machine/ controller is marketed in the USA or other countries. I guess it must be as they have to be sold somewhere.

    I have already posted in the onecnc forum but that's a little used forum with not a lot of exposure it seems.

    I have attached an image of the control if case it rings any bells with someone seeing this controller used with onecnc

    Any information or even a post to try would be appreciated.


    Kind regards,

    One cnc post for C Tek / CNT controller-c-tek-cnt-jpg

    Similar Threads:
    Last edited by scott0031; 05-25-2014 at 07:25 PM.


  2. #2

    Default Re: One cnc post for C Tek / CNT controller

    Hi Scott
    Here is the post for your c-tek controller
    just unzip and put in your settings folder where OneCNC is installed on your pc
    C-TEK.zip



  3. #3
    Junior Member AZZAMGHOST's Avatar
    Join Date
    Mar 2016
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    THANK YOU f



  4. #4
    Registered
    Join Date
    Oct 2016
    Location
    Turkey
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: One cnc post for C Tek / CNT controller



    Last edited by hasanmmm; 02-18-2017 at 02:06 PM. Reason: fault


  5. #5
    Registered
    Join Date
    Nov 2010
    Location
    United Kingdom
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: One cnc post for C Tek / CNT controller

    Hi ,
    Can anyone help out with the post processor for the same CTek machine as above but running bobcat V21 ??
    Thanks



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

One cnc post for C Tek / CNT controller

One cnc post for C Tek / CNT controller