- Linear guide lubrication Omni 1325 CNC router
-
Member
Linear guide lubrication Omni 1325 CNC router
There is an auto lubrication setup for the hiwin linear bearings. Oil is pumped to the bearings, and the problem I have is that oil is reaching the X & Z blocks, but is not reaching the Y blocks. Anyone else having the same issue?
Also, any idea of the oil lubrication spec?
Similar Threads:
-
- Linear guide lubrication Omni 1325 CNC router
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules