OKUMA MU-5000V OSP-300MA - LOADING REFERENCE TOOL + RENISHAW TS27R


Results 1 to 1 of 1

Thread: OKUMA MU-5000V OSP-300MA - LOADING REFERENCE TOOL + RENISHAW TS27R

  1. #1
    Registered scottbryce's Avatar
    Join Date
    Apr 2015
    Location
    Mundaring
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default OKUMA MU-5000V OSP-300MA - LOADING REFERENCE TOOL + RENISHAW TS27R

    Hey Guys,

    Purchased a used Okuma MU-5000V 5 axis machine with OSP-300MA Controller.

    How do I insert/create/load/specify a REFERENCE TOOL in teh libary or magazing(I can only seem to select a model of a milling cutter, drill etc...)

    How do I advise the OSP that the tool in the magazing is the REFERENCE TOOL

    When I try to set any of my tools manually, the TS27R RED LED light does not come on when I touch the reference tool or any tool against the top of the tool presetter.

    Any suggestions?
    What am I missing ?

    Attached Thumbnails Attached Thumbnails OKUMA MU-5000V OSP-300MA - LOADING REFERENCE TOOL + RENISHAW TS27R-ts27r__41855-jpg  


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

OKUMA MU-5000V OSP-300MA - LOADING REFERENCE TOOL + RENISHAW TS27R

OKUMA MU-5000V OSP-300MA - LOADING REFERENCE TOOL + RENISHAW TS27R