Having trouble with a very steep tapered thread on OSP7000


Results 1 to 3 of 3

Thread: Having trouble with a very steep tapered thread on OSP7000

  1. #1
    Member
    Join Date
    Feb 2010
    Location
    US
    Posts
    85
    Downloads
    0
    Uploads
    0

    Default Having trouble with a very steep tapered thread on OSP7000

    Special purpose type thing, 2.75" dia change in 6" of run. Is that an I value of 1.604" starting 1/2" before the part? Can the control even handle that big of an I value?
    G71X2.75z-6.I1.604D.05H.375F.15M33M73

    Similar Threads:
    Last edited by Doggitter; 01-11-2024 at 08:32 PM. Reason: more info


  2. #2
    Member
    Join Date
    Feb 2010
    Location
    US
    Posts
    85
    Downloads
    0
    Uploads
    0

    Default Re: Having trouble with a very steep tapered thread on OSP7000

    Got it figured out.



  3. #3
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    4172
    Downloads
    0
    Uploads
    0

    Default Re: Having trouble with a very steep tapered thread on OSP7000

    Can the control even handle ...
    hy as long as angle < 45*, and linear axis speed is slow in comparison to rapid, then no worries

    if you wish for specific advice, please share more / kindly

    figured out
    k

    we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Having trouble with a very steep tapered thread on OSP7000

Having trouble with a very steep tapered thread on OSP7000